Efficient biotransformation of naringenin to naringenin α-glucoside, a novel α-glucosidase inhibitor, by amylosucrase from Deinococcus wulumuquiensis.

Amylosucrase (ASase) efficiently biosynthesizes α-glucoside using flavonoids as acceptor molecules and sucrose as a donor molecule. Here, ASase from Deinococcus wulumuqiensis (DwAS) biosynthesized more naringenin α-glucoside (NαG) with sucrose and naringenin as donor and acceptor molecules, respectively, than other ASases from Deinococcus sp. The biotransformation rate of DwAS to NαG was 21.3% compared to 7.1-16.2% for other ASases. Docking simulations showed that the active site of DwAS was more accessible to naringenin than those of others. The 217th valine in DwAS corresponded to the 221st isoleucine in Deinococcus geothermalis AS (DgAS), and the isoleucine possibly prevented naringenin from accessing the active site. The DwAS-V217I mutant had a significantly lower biosynthetic rate of NαG than DwAS. The kcat/Km value of DwAS with naringenin as the donor was significantly higher than that of DgAS and DwAS-V217I. In addition, NαG inhibited human intestinal α-glucosidase more efficiently than naringenin.

Enhancement of ß-Cyclodextrin Production Using a Glycogen Debranching Enzyme from Saccharolobus solfataricus STB09.

Efficient production of cyclodextrins (CDs) has always been challenging. CDs are primarily produced from starch via cyclodextrin glycosyltransferase (CGTase), which acts on α-1,4 glucosidic bonds; however, α-1,6 glucosidic bonds in starch suppress the enzymatic production of CDs. In this study, a glycogen debranching enzyme from Saccharolobus solfataricus STB09 (SsGDE) was utilized to promote the production of ß-CD by hydrolyzing α-1,6 glucosidic bonds. The addition of SsGDE (750 U/g of starch) at the liquefaction stage remarkably improved the ß-CD yield, with a 43.9% increase. Further mechanism exploration revealed that SsGDE addition could hydrolyze specific branches with less generation of byproducts, thereby promoting CD production. The chain segments of a degree of polymerization ≥13 produced by SsGDE debranching could also be utilized by ß-CGTase to convert into CDs. Overall, these findings proposed a new approach of combining SsGDE with ß-CGTase to enhance the CD yield.

Molecular basis of ligand recognition specificity of flavone glucosyltransferases in Nemophila menziesii.

Of the more than 100 families of glycosyltransferases, family 1 glycosyltransferases catalyze glycosylation using uridine diphosphate (UDP)-sugar as a sugar donor and are thus referred to as UDP-sugar:glycosyl transferases. The blue color of the Nemophila menziesii flower is derived from metalloanthocyanin, which consists of anthocyanin, flavone, and metal ions. Flavone 7-O-ß-glucoside-4'-O-ß-glucoside in the plant is sequentially biosynthesized from flavons by UDP-glucose:flavone 4'-O-glucosyltransferase (NmF4'GT) and UDP-glucose:flavone 4'-O-glucoside 7-O-glucosyltransferase (NmF4'G7GT). To identify the molecular mechanisms of glucosylation of flavone, the crystal structures of NmF4'G7GT in its apo form and in complex with UDP-glucose or luteolin were determined, and molecular structure prediction using AlphaFold2 was conducted for NmF4'GT. The crystal structures revealed that the size of the ligand-binding pocket and interaction environment for the glucose moiety at the pocket entrance plays a critical role in the substrate preference in NmF4'G7GT. The substrate specificity of NmF4'GT was examined by comparing its model structure with that of NmF4'G7GT. The structure of NmF4'GT may have a smaller acceptor pocket, leading to a substrate preference for non-glucosylated flavones (or flavone aglycones).

Discovery and Characterization of Fluopipamine, a Putative Cellulose Synthase 1 Antagonist within Arabidopsis.

Herbicide-resistant weeds are increasingly a problem in crop fields when exposed to similar chemistry over time. To avoid future yield losses, identifying herbicidal chemistry needs to be accelerated. We screened 50,000 small molecules using a liquid-handling robot and light microscopy focusing on pre-emergent herbicides in the family of cellulose biosynthesis inhibitors. Through phenotypic, chemical, genetic, and in silico methods we uncovered 6-{[4-(2-fluorophenyl)-1-piperazinyl]methyl}-N-(2-methoxy-5-methylphenyl)-1,3,5-triazine-2,4-diamine (fluopipamine). Symptomologies support fluopipamine as a putative antagonist of cellulose synthase enzyme 1 (CESA1) from Arabidopsis (Arabidopsis thaliana). Ectopic lignification, inhibition of etiolation, phenotypes including loss of anisotropic cellular expansion, swollen roots, and live cell imaging link fluopipamine to cellulose biosynthesis inhibition. Radiolabeled glucose incorporation of cellulose decreased in short-duration experiments when seedlings were incubated in fluopipamine. To elucidate the mechanism, ethylmethanesulfonate mutagenized M2 seedlings were screened for fluopipamine resistance. Two loci of genetic resistance were linked to CESA1. In silico docking of fluopipamine, quinoxyphen, and flupoxam against various CESA1 mutations suggests that an alternative binding site at the interface between CESA proteins is necessary to preserve cellulose polymerization in compound presence. These data uncovered potential fundamental mechanisms of cellulose biosynthesis in plants along with feasible leads for herbicidal uses.

Pushing the boundaries of phosphorylase cascade reaction for cellobiose production II: Model-based multiobjective optimization.

The inherent complexity of coupled biocatalytic reactions presents a major challenge for process development with one-pot multienzyme cascade transformations. Kinetic models are powerful engineering tools to guide the optimization of cascade reactions towards a performance suitable for scale up to an actual production. Here, we report kinetic model-based window of operation analysis for cellobiose production (≥100 g/L) from sucrose and glucose by indirect transglycosylation via glucose 1-phosphate as intermediate. The two-step cascade transformation is catalyzed by sucrose and cellobiose phosphorylase in the presence of substoichiometric amounts of phosphate (≤27 mol% of substrate). Kinetic modeling was instrumental to uncover the hidden effect of bulk microviscosity due to high sugar concentrations on decreasing the rate of cellobiose phosphorylase specifically. The mechanistic-empirical hybrid model thus developed gives a comprehensive description of the cascade reaction at industrially relevant substrate conditions. Model simulations serve to unravel opposed relationships between efficient utilization of the enzymes and maximized concentration (or yield) of the product within a given process time, in dependence of the initial concentrations of substrate and phosphate used. Optimum balance of these competing key metrics of process performance is suggested from the model-calculated window of operation and is verified experimentally. The evidence shown highlights the important use of kinetic modeling for the characterization and optimization of cascade reactions in ways that appear to be inaccessible to purely data-driven approaches.

Immobilization of Cyclodextrin glycosyltransferase onto three dimensional- hydrophobic and two dimensional- hydrophilic supports: A comparative study.

Cyclodextrin glycosyltransferase (CGTase) degrades starch into cyclodextrin via enzymatic activity. In this study, we immobilize CGTase from Thermoanaerobacter sp. on two supports, namely graphene nanoplatelets (GNP) consisting of short stacks of graphene nanoparticles and a calcium-based two-dimensional metal organic framework (Ca-TMA). The uptakes of CGTase on GNP and Ca-TMA reached 40 and 21 mg g-1 respectively, but immobilized CGTase on Ca-TMA showed a higher specific activity (38 U mg-1 ) than that on GNP (28 U mg-1 ). Analysis of secondary structures of CGTase, shows that immobilization reduces the proportion of ß-sheets in CGTase from 56% in the free to 49% and 51.3% for GNP and Ca-TMA respectively, α-helix from 38.5% to 18.1 and 37.5%, but led to increased ß-turns from 5.5 to 40% and 11.2% for GNP and Ca-TMA, respectively. Lower levels of conformational changes were observed over the more hydrophilic Ca-TMA compared to hydrophobic GNP, resulting in its better activity. Increased ß-turns were found to correlate with lower ß-CD production, while more ß-sheets and α-helix favored more ß-CD. Reusability studies revealed that GNP retains up to 74% of initial CGTase activity, while Ca-TMA dropped to 33% after eight consecutive uses. The results obtained in this work provide insight on the effect of support's surface properties on CGTase performance and can assist in developing robust CGTase-based biocatalysts for industrial application.

Dual-Specificity Inhibitor Targets Enzymes of the Trehalose Biosynthesis Pathway.

To reduce the risk of resistance development, a novel fungicide with dual specificity is demanded. Trehalose is absent in animals, and its synthases, trehalose-6-phosphate synthase (TPS) and trehalose-6-phosphate phosphatase (TPP), are safe fungicide targets. Here, we report the discovery of a dual-specificity inhibitor of MoTps1 (Magnaporthe oryzae Tps1, TPS) and MoTps2 (M. oryzae Tps2, TPP). The inhibitor, named A1-4, was obtained from a virtual screening and subsequent surface plasmon resonance screening. In in vitro assays, A1-4 interacts with MoTps1 and MoTps2-TPP (MoTps2 TPP domain) and inhibits their enzyme activities. In biological activity assays, A1-4 not only inhibits the virulence of M. oryzae on host but also causes aggregation of conidia cytosol, which is a characteristic phenotype of MoTps2. Furthermore, hydrogen/deuterium exchange mass spectrometry assays support the notion that A1-4 binds to the substrate pockets of TPS and TPP. Collectively, A1-4 is a promising hit compound for the development of safe fungicide with dual-target specificity.

Resveratrol glucosylation by GTF-SI from Streptococcus mutans: computational insights into a GH70 family enzyme.

Resveratrol, a polyphenolic compound known for its health benefits but limited by poor water solubility and low bioavailability, represents a valuable substrate for glucosylation by carbohydrate-active enzymes such as glucosyltransferase-SI (GTF-SI). Using quantum mechanics/molecular mechanics (QM/MM) calculations and molecular dynamics simulations, this study reveals the atomic scale dynamics of resveratrol glucosylation by wild-type GTF-SI. This enzyme exhibited an energy barrier of 8.8 kcal mol-1 and an exothermic process, both consistent with experimental data of similar enzymes. We report a concerted and synchronous reaction mechanism for the catalytic step, characterized by an oxocarbenium ion-like transition state, and elucidate a conformational itinerary of the glucosyl moiety (4H3/E3) → [E3]‡ → 4C1, which aligns with the consistent patterns observed across enzymes of the GH13 and GH70 families. A key interaction was observed between Asp477 and the OH group on carbon 6 of the glucosyl moiety, together with a 2.0 kcal mol-1 transition state stabilization by three water molecules within the active site. Comparative insights with the previously studied Q345F SP enzyme system shed light on the unique and common features that govern transglucosylation reactions. Importantly, the calculated activation barriers strongly support the capability of GTF-SI to facilitate resveratrol glucosylation. This study advances our understanding of the transglucosylation reaction and opens up new ways for the glycodiversification of organic compounds such as polyphenols, thus expanding their potential applications in the food, cosmetic, and pharmaceutical industries.

Insights into substrate coordination and glycosyl transfer of poplar cellulose synthase-8.

Cellulose is an abundant cell wall component of land plants. It is synthesized from UDP-activated glucose molecules by cellulose synthase, a membrane-integrated processive glycosyltransferase. Cellulose synthase couples the elongation of the cellulose polymer with its translocation across the plasma membrane. Here, we present substrate- and product-bound cryogenic electron microscopy structures of the homotrimeric cellulose synthase isoform-8 (CesA8) from hybrid aspen (poplar). UDP-glucose binds to a conserved catalytic pocket adjacent to the entrance to a transmembrane channel. The substrate's glucosyl unit is coordinated by conserved residues of the glycosyltransferase domain and amphipathic interface helices. Site-directed mutagenesis of a conserved gating loop capping the active site reveals its critical function for catalytic activity. Molecular dynamics simulations reveal prolonged interactions of the gating loop with the substrate molecule, particularly across its central conserved region. These transient interactions likely facilitate the proper positioning of the substrate molecule for glycosyl transfer and cellulose translocation.

Enzymatic Synthesis of α-Glucosyl-Baicalin through Transglucosylation via Cyclodextrin Glucanotransferase in Water.

Baicalin is a biologically active flavone glucuronide with poor water solubility that can be enhanced via glucosylation. In this study, the transglucosylation of baicalin was successfully achieved with CGTases from Thermoanaerobacter sp. and Bacillus macerans using α-cyclodextrin as a glucosyl donor. The synthesis of baicalin glucosides was optimized with CGTase from Thermoanaerobacter sp. Enzymatically modified baicalin derivatives were α-glucosylated with 1 to 17 glucose moieties. The two main glucosides were identified as Baicalein-7-O-α-D-Glucuronidyl-(1→4')-O-α-D-Glucopyranoside (BG1) and Baicalein-7-O-α-D-Glucuronidyl-(1→4')-O-α-D-Maltoside (BG2), thereby confirming recent findings reporting that glucuronyl groups are acceptors of this CGTase. Optimized conditions allowed for the attainment of yields above 85% (with a total glucoside content higher than 30 mM). BG1 and BG2 were purified via centrifugal partition chromatography after an enrichment through deglucosylation with amyloglucosidase. Transglucosylation increased the water solubility of BG1 by a factor of 188 in comparison to that of baicalin (molar concentrations), while the same value for BG2 was increased by a factor of 320. Finally, BG1 and BG2 were evaluated using antioxidant and anti-glycation assays. Both glucosides presented antioxidant and anti-glycation properties in the same order of magnitude as that of baicalin, thereby indicating their potential biological activity.

The catalytic domains of Streptococcus mutans glucosyltransferases: a structural analysis.

Streptococcus mutans, found in the human oral cavity, is a significant contributor to the pathogenesis of dental caries. This bacterium expresses three genetically distinct types of glucosyltransferases named GtfB (GTF-I), GtfC (GTF-SI) and GtfD (GTF-S) that play critical roles in the development of dental plaque. The catalytic domains of GtfB, GtfC and GtfD contain conserved active-site residues for the overall enzymatic activity that relate to hydrolytic glycosidic cleavage of sucrose to glucose and fructose, release of fructose and generation of a glycosyl-enzyme intermediate in the reducing end. In a subsequent transglycosylation step, the glucosyl moiety is transferred to the nonreducing end of an acceptor to form a growing glucan polymer chain made up of glucose molecules. It has been proposed that both sucrose breakdown and glucan synthesis occur in the same active site of the catalytic domain, although the active site does not appear to be large enough to accommodate both functions. These three enzymes belong to glycoside hydrolase family 70 (GH70), which shows homology to glycoside hydrolase family 13 (GH13). GtfC synthesizes both soluble and insoluble glucans (α-1,3 and α-1,6 glycosidic linkages), while GtfB and GtfD synthesize only insoluble or soluble glucans, respectively. Here, crystal structures of the catalytic domains of GtfB and GtfD are reported. These structures are compared with previously determined structures of the catalytic domain of GtfC. With this work, apo structures and inhibitor-complex structures with acarbose are now available for the catalytic domains of GtfC and GtfB. The structure of GtfC with maltose allows further identification and comparison of active-site residues. A model of sucrose binding to GtfB is also included. The new structure of the catalytic domain of GtfD affords a structural comparison of the three S. mutans glycosyltransferases. Unfortunately, the catalytic domain of GtfD is not complete since crystallization resulted in the structure of a truncated protein lacking approximately 200 N-terminal residues of domain IV.

Plant cellulose synthase membrane protein isolation directly from Pichia pastoris protoplasts, liposome reconstitution, and its enzymatic characterization.

Cellulose is synthesized by a plant cell membrane-integrated processive glycosyltransferase (GT) called cellulose synthase (CesA). Since only a few of these plant CesAs have been purified and characterized to date, there are huge gaps in our mechanistic understanding of these enzymes. The biochemistry and structural biology studies of CesAs are currently hampered by challenges associated with their expression and extraction at high yields. To aid in understanding CesA reaction mechanisms and to provide a more efficient CesA extraction method, two putative plant CesAs - PpCesA5 from Physcomitrella patens and PttCesA8 from Populus tremula x tremuloides that are involved in primary and secondary cell wall formation in plants were expressed using Pichia pastoris as an expression host. We developed a protoplast-based membrane protein extraction approach to directly isolate these membrane-bound enzymes, as confirmed by immunoblotting and mass spectrometry-based analyses. Our method gives 3-4-fold higher purified protein yield than the standard cell homogenization protocol. Our method resulted in liposome reconstituted CesA5 and CesA8 enzymes with similar Michaelis-Menten kinetic constants, Km = 167 µM, 108 µM and Vmax = 7.88 × 10-5 µmol/min, 4.31 × 10-5 µmol/min, respectively, in concurrence with the previous studies for enzymes isolated using the standard protocol. Taken together, these results suggest that CesAs involved in primary and secondary cell wall formation can be expressed and purified using a simple and more efficient extraction method. This protocol could help isolate enzymes that unravel the mechanism of native and engineered cellulose synthase complexes involved in plant cell wall biosynthesis.

Enhancing 2-O-α-D-glucopyranosyl-L-ascorbic acid synthesis by weakening the acceptor specificity of CGTase toward glucose and maltose.

2-O-α-D-glucopyranosyl-L-ascorbic acid (AA-2G) is a stable derivative of L-ascorbic acid (L-AA), which has been widely used in food and cosmetics industries. Sugar molecules, such as glucose and maltose produced by cyclodextrin glycosyltransferase (CGTase) during AA-2G synthesis may compete with L-AA as the acceptors, resulting in low AA-2G yield. Multiple sequence alignment combined with structural simulation analysis indicated that residues at positions 191 and 255 of CGTase may be responsible for the difference in substrate specificity. To investigate the effect of these two residues on the acceptor preference and the AA-2G yield, five single mutants Bs F191Y, Bs F255Y, Bc Y195F, Pm Y195F and Pm Y260F of three CGTases from Bacillus stearothermophilus NO2 (Bs), Bacillus circulans 251 (Bc) and Paenibacillus macerans (Pm) were designed for AA-2G synthesis. Under optimal conditions, the AA-2G yields of the mutants Bs F191Y and Bs F255Y AA-2G were 34.3% and 7.9% lower than that of Bs CGTase, respectively. The AA-2G yields of mutant Bc Y195F, Pm Y195F and Pm Y260F were 45.8%, 36.9% and 12.6% higher than those of wild-type CGTases, respectively. Kinetic studies revealed that the residues at positions 191 and 255 of the three CGTases were F, which decreased glucose and maltose specificity and increased L-AA specificity. This study not only proposes for the first time that the AA-2G yield can be improved by weakening the acceptor specificity of CGTase toward sugar byproducts, but also provides new insight on the modification of CGTase that catalyze the double-substrate transglycosylation reaction.

Structural and mechanistic insights into fungal ß-1,3-glucan synthase FKS1.

The membrane-integrated synthase FKS is involved in the biosynthesis of ß-1,3-glucan, the core component of the fungal cell wall1,2. FKS is the target of widely prescribed antifungal drugs, including echinocandin and ibrexafungerp3,4. Unfortunately, the mechanism of action of FKS remains enigmatic and this has hampered development of more effective medicines targeting the enzyme. Here we present the cryo-electron microscopy structures of Saccharomyces cerevisiae FKS1 and the echinocandin-resistant mutant FKS1(S643P). These structures reveal the active site of the enzyme at the membrane-cytoplasm interface and a glucan translocation path spanning the membrane bilayer. Multiple bound lipids and notable membrane distortions are observed in the FKS1 structures, suggesting active FKS1-membrane interactions. Echinocandin-resistant mutations are clustered at a region near TM5-6 and TM8 of FKS1. The structure of FKS1(S643P) reveals altered lipid arrangements in this region, suggesting a drug-resistant mechanism of the mutant enzyme. The structures, the catalytic mechanism and the molecular insights into drug-resistant mutations of FKS1 revealed in this study advance the mechanistic understanding of fungal ß-1,3-glucan biosynthesis and establish a foundation for developing new antifungal drugs by targeting FKS.

Production of branched glucan polymer by a novel thermostable branching enzyme of Bifidobacterium thermophilum via one-pot biosynthesis containing a dual enzyme system.

Glycogen-like particles (GLPs) are applied in food, pharmaceutical, and cosmetics. The large-scale production of GLPs is limited by their complicated multi-step enzymic processes. In this study, GLPs were produced in a one-pot dual-enzyme system using Bifidobacterium thermophilum branching enzyme (BtBE) and Neisseria polysaccharea amylosucrase (NpAS). BtBE showed excellent thermal stability (half-life of 1732.9 h at 50 °C). Substrate concentration was the most influential factor during GLPs production in this system: GLPs yield and [sucrose]ini decreased from 42.4 % to 17.4 % and 0.3 to 1.0 M, respectively. Molecular weight and apparent density of GLPs decreased significantly with increasing [sucrose]ini. Regardless of the [sucrose]ini, the DP 6 of branch chain length was predominantly occupied. GLP digestibility increased with increasing [sucrose]ini, indicating that the degree of GLP hydrolysis may be negatively related to its apparent density. This one-pot biosynthesis of GLPs using a dual-enzyme system could be useful for the development of industrial processes.

Engineering the Thermostability of Sucrose Synthase by Reshaping the Subunit Interaction Contributes to Efficient UDP-Glucose Production.

The restricted availability of UDP-glucose, an essential precursor that targets oligo/polysaccharide and glycoside synthesis, makes its practical application difficult. Sucrose synthase (Susy), which catalyzes one-step UDP-glucose synthesis, is a promising candidate. However, due to poor thermostability of Susy, mesophilic conditions are required for synthesis, which slow down the process, limit productivity, and prevent scaled and efficient UDP-glucose preparation. Here, we obtained an engineered thermostable Susy (mutant M4) from Nitrosospira multiformis through automated prediction and greedy accumulation of beneficial mutations. The mutant improved the T1/2 value at 55 °C by 27-fold, resulting in UDP-glucose synthesis at 37 g/L/h of space-time yield that met industrial biotransformation standards. Furthermore, global interaction between mutant M4 subunits was reconstructed by newly formed interfaces according to molecular dynamics simulations, with residue Trp162 playing an important role in strengthening the interface interaction. This work enabled effective, time-saving UDP-glucose production and paved the way for rational thermostability engineering of oligomeric enzymes.

Resistant starch formation mechanism of amylosucrase-modified starches with crystalline structure enhanced by hydrothermal treatment.

The aim of this study was to reveal the underlying mechanism contributing towards the formation of resistant starch (RS) in amylosucrase-modified starches with crystalline structure enhanced by hydrothermal treatment. The branch chains of waxy corn starch were continuously elongated by amylosucrase, and the retrogradation of elongated starches with weight-average chain length (CLw¯) of 27.0-37.6 yielded B-type retrograded starches (MSs) with crystallinity increasing from 33.1 % (MS-5) to 41.4 % (MS-30). Increasing the starch crystallinity improved the content of RS from 6.7 % of MS-5 to be as much as 41.0 % of MS-30. During the hydrothermal treatment, MS-5 with CLw¯ of 27.0 favored the B â†’ A allomorphic transition, leading to the decreased starch digestibility. Moreover, the hydrothermal treatment facilitated the assembly of double helices to increase starch crystallinity, which further increased the content of RS. The findings of the present study may assist the preparation of functional starches with controllable digestibility.

Synthesis of Alpha-Linked Glucosides from Soybean Isoflavone Aglycones Using Amylosucrase from Deinococcus geothermalis.

Soybean isoflavone aglycones (SIAs) have many biological activities but are poorly water-soluble in the human body. Glycosylation provides structural diversity to SIAs and can alter their physicochemical properties, including water solubility. An alpha-linked glucosylation of SIA was achieved using amylosucrase from Deinococcus geothermalis. A total of 13 alpha-linked glucosyl SIAs were obtained, and their colors in solution were confirmed. The structures of the isolated compounds were identified by mass spectrometry and multidimensional nuclear magnetic resonance spectroscopy. The amylosucrase transglycosylation formed new isoflavone glycosides with alpha glycosidic bonds at C-7 and/or C-4' of SIAs, followed by the production of isoflavone glycosides with alpha (1 → 6) glycosidic bonds. The products with a glucosyl moiety attached to the C-4' of SIAs were found to be more water-soluble than their counterparts attached to the C-7 and/or beta-linkages. This study suggests a strategy for the synthesis of bioactive compounds with enhanced water solubility through alpha-linked glucosylation.

Hydrothermal induced B → A allomorphic transition in retrograded starches with side chains elongated by amylosucrase to different lengths.

In this study, chain-elongated starches were modified with hydrothermal treatment to produce hydrothermal-treated starches with different crystalline structures. All chain-elongated starches showed a B-type crystalline structure and the retrogradation of long branch chains accelerated the formation of starch crystallites. The hydrothermal treatment preserved the granular structure of starches but facilitated the rearrangement of starch chains to generate crystallites. Starches with short chain length favored the B â†’ A allomorphic transition during the hydrothermal treatment. A longer chain length of starch led to greater stability of double helices and accordingly inhibited the B â†’ A allomorphic transition, resulting from the hydrogen bonding along with the direction of helix restrained the displacement of the helix. The longer double helices resulted in higher gelatinization temperature of the chain-elongated starches. Moreover, the gelatinization temperature of the starches was further enhanced by the hydrothermal treatment, and both increased crystallinity and B â†’ A allomorphic transition contributed to the improved thermal stability of the hydrothermal-treated starches.

Mutations in the Different Residues between Dextransucrase Gtf-DSM and Reuteransucrase GtfO for the Investigation of Linkage Specificity Determinants.

The dextransucrase Gtf-DSM has 99.3% sequence identity with the reuteransucrase GtfO, and only 11 out of 1045 residues are different between their N-terminally truncated recombinant forms. Gtf-DSM is capable of synthesizing a dextran with 1% (α1 → 2), 6% (α1 → 4), 24% (α1 → 3), and 69% (α1 → 6) linkages, while GtfO produces a reuteran with 21% (α1 → 6) and 79% (α1 → 4) linkages. In this work, using recombinant Gtf-DSM and GtfO as templates, parallel substitutions targeting these 11 distinguishing residues were performed to investigate their linkage specificity determinants. The combinatorial mutation (I937L/D977A/D1083V/Q1086K/K1087G) at the acceptor binding subsites +1 and +2 nearly converted the linkage specificity of Gtf-DSM to that of GtfO. Surprisingly, all of the individual or combinatorial mutations in four residues from domains IV and V of Gtf-DSM significantly altered the linkage specificity of Gtf-DSM. Additionally, all mutations in the 11 distinguishing residues of Gtf-DSM resulted in a dramatically reduced transferase/hydrolysis activity ratio, which was closer to that of GtfO. These mutation results suggested that the linkage specificity differences between Gtf-DSM and GtfO are determined by the distinct micro-physicochemical environments, formed by the concerted action of a series of residues not only from the acceptor binding subsites +1 and +2 but also from domains IV and V.